Pool filter how to#
Pool filter manual#

Once the clamps are removed, open the tank, remove the manifold, and take out all the grids. Remove the drain plug and then remove the clamps after the water has completely drained. Start by backwashing your filter to remove debris, and then turn the pump off and open the air relief valve.

You’ll want to grab your hose, some cleaner, and a bucket again for this one.

filter should be cleaned at least once per month, or when you notice that the water is starting to look cloudy.

Pool filter manual#

Try again, following the owner’s manual very closely. If you think your pounds per square inch (PSI) seems wrong, you may not have put it back together quite right. Make sure that it is rinsed thoroughly, replace, and then secure it.īe sure to turn everything back on, check the air relief valve, and double check the system pressure. If you find that it’s not getting clean enough with these methods, you can always let it soak overnight in your cleaning mixture. This is the time to inspect it for cracks or damages that would require the use of a new o-ring or cartridge.Ĭartridges are easily cleaned with your garden hose and cleaner. Once you’ve set everything aside, you’ll need to perform a quality assurance check. There might be a certain way to release the filter to ensure you don’t cause any damage. This is one of the times you may want to refer to your owner’s manual. Next, release the mechanisms holding everything together, remove the top filter, and set the cartridge aside. Turn the air relief valve off slowly to release any trapped air. Start by turning off your pump, system, and your air relief valve. You’ll need a hose, spray nozzle, cleaner, a large bucket, and a replacement o-ring, and replacement cartridge, if needed. In order to prep for cleaning, grab a few household items. We carry over 20 cartridge pool filters, so let’s break down the cleaning process for those first. If your pool is large or gets a significant amount of use, you may want to consider cleaning it more often, though.

Pool filter how to#

How To Clean Your Cartridge FilterĬartridges are the easiest to clean and maintain, and only require deep cleaning one or two times per year. There are three main types: cartridge, D.E, and sand filters and each one has a different cleaning method. While it’s essential to follow proper maintenance habits to increase its lifespan, it’s also important to understand which type you have in order to clean and maintain it properly. It’s clear to see that cleaning is an essential part of your pool’s health – and yours. If neglected, this becomes a breeding ground for dangerous bacteria and compromises your safety. If you neglect your filter, you are sure to increase debris and dirt and, let’s face it, dirty water isn’t any fun to swim in.ĭid you know that it’s also made to keep you healthy? When it’s at its best, it will clean out bacteria and prevent it from accumulating. Did you know that using suntan lotion, deodorant, and other chemicals can decrease its lifespan almost in half? While we are not advocating you forgo the suntan lotion, we did want to take time to address the importance of and maintenance habits for a healthy, clean pool.

The average life of your filter is around two years, and that’s highly dependent on how well you clean and maintain it. But, how often should cleaning happen? If you’re a beginner, we have you covered. This often overlooked but essential task is easy to do yourself and critical to the health of your pool. In order to keep your water clean and crystal clear, it’s time to learn how to clean a pool filter.